What Is a Culebra Cigar and How Do You Smoke the Braid?
A culebra cigar is a braid of three thin cigars. Untie it, then smoke the cigars one at a time or share them instead of lighting all three together.
Each cigar is separate, even though the braid may have a band or cap around the group. On the Cigar Aficionado Podcast audience-questions episode, the magazine's editors say people sometimes mistake the three cigars for one cigar with three heads.
What a Culebra Is and How to Smoke It
A culebra is three curved cigars twisted together and tied into a braid. The Cigar Aficionado editors say the cigars are meant to be separated and shared, or smoked at different times. The name means "snake" in Spanish, a reference to their winding shape.
To smoke one, take the braid apart before cutting or lighting a cigar:
- Untie the strings holding the braid at its ends.
- Remove any band or cap holding the cigars together.
- Separate the three cigars.
- Cut and light one cigar as you normally would. If you need the basic technique, see how to smoke a cigar.
- Share the other cigars or keep them for another time.
Holt's Cigar Company says smoking all three at once is possible, but its author does not recommend it. The author describes seeing someone clip just one cap and try to light the whole braid. The editors give the same practical direction: split the braid because it contains three individual cigars.
A culebra can look like a single object while it is tied. Remove the ties, band and any shared cap, then separate the cigars before cutting one.
How a Culebra Is Made
Holt's describes a culebra as usually made from three underfilled Panetela cigars. Its typical size example is 6 x 38. A Cigar Aficionado editor gave a different size for the El Pulpo Octo Ocho smoked during the podcast episode: 7 x 38. Those are examples from different sources. No single size fits every culebra. For an explanation of ring gauge, see the cigar sizes guide.
According to Holt's, makers leave out some filler so the cigars can bend during braiding without breaking or cracking their wrappers. The tobacco is wetter than usual while the cigars are manipulated, which also keeps them flexible. Those details explain how three thin cigars can take a twisted shape. They do not establish how any particular finished cigar will draw.
Holt's says the maker ties the cigars together about a half-inch down from one end, braids them, then ties the other end. The braid usually has no more than two or three twists, depending on the cigars' length. The ties hold the cigars in their curved positions as they age.
The finishing details vary. Holt's says some makers add bands and some do not, and some put one large cap over the group. It also describes culebras made with four coiled cigars, though it says those are uncommon. If a braid has a shared band or cap, remove that piece when separating the cigars rather than treating the group as one cigar.
Does a Culebra Draw Well?
The two accounts give different answers about culebra draw. The Cigar Aficionado editors describe good draws, while Holt's author reports occasional inconsistencies.
| Source | What it says about draw |
|---|---|
| Cigar Aficionado editors | One editor said the El Pulpo Octo Ocho in the episode drew perfectly. Another said he had never had a culebra with a bad draw. |
| Holt's Cigar Company | Its author says the draw is "usually pretty good," but the author has found inconsistencies, especially among Cuban brands. |
The editors acknowledge why someone might worry: a cigar that has been bent into a braid looks as though it could draw poorly. Their accounts say the cigars they smoked did not have that problem. Holt's author suggests underfilling may account for some of the inconsistency the author encountered. That is the author's guess. Holt's does not offer a measurement.
Neither source cites a draw test that would settle the difference between those experiences. If an individual cigar feels too tight after you separate it, use the steps to fix a tight draw rather than assuming every cigar in the braid will behave the same way.
Where the Culebra Story Comes From
The factory-allotment story is culebra lore. The sources do not establish it as the origin. As the Cigar Aficionado editors tell it, rollers in old Cuban factories supposedly took home a braid of three cigars. Its unusual shape would let a factory manager recognize their allotment. The editors say they know of no factory with that rule in place. One editor allows that it might have happened at one factory at one time.
Holt's says there is no evidence supporting the allotment story. Its earliest cited reference is an 1890 newspaper report about culebra production in the Philippines. Holt's also cites a 2003 cigar encyclopedia that places the shape's first appearance in the Philippines around the middle of the 19th century.
The record Holt's describes extends beyond that account. Its article reports evidence of American-made "twisters" around the same period, including a box dated 1890 and later examples with three or four cigars. Holt's says most historians place the culebra's start between 1880 and 1885. That date range does not establish the factory-allotment story.
Holt's best guess is that makers offered the culebra as a novelty. The 1890 newspaper described one as a novelty formed from three plaited cigars. The Cigar Aficionado editors likewise call the culebra an enduring novelty. Neither account establishes who first made the shape or why.
Culebra Examples and Makers
The cited sources name Cuban and non-Cuban makers of culebras. The format notes below stay with the specific examples each source describes. Do not fill an empty detail for one cigar in from another.
| Culebra | Maker | Cuban or not, as Holt's states | Format note from the sources |
|---|---|---|---|
| Partagas Culebra | Partagas | Cuban brand | Holt's: three identical cigars with one large, wide band around all. The editors call it the most famous culebra |
| H. Upmann culebra | H. Upmann | Cuban brand | Not stated by the source |
| Romeo y Julieta culebra | Romeo y Julieta | Cuban brand | Not stated by the source |
| Davidoff Discovery Culebra | Davidoff | Not stated by the source | Holt's: a Nicaragua, a Yamasa and an Escurio cigar, each with its own small band |
| Davidoff Special C | Davidoff | Non-Cuban | Not stated by the source |
| The Old Man and the C | Tatuaje | Non-Cuban | Not stated by the source |
| 23 Culebra | Illusione | Non-Cuban | Not stated by the source |
| Hamlet Tabaquero Culebra | Rocky Patel | Non-Cuban | Not stated by the source |
| Culebra Especial | La Flor Dominicana | Non-Cuban | Not stated by the source |
| Medusa | Drew Estate | Non-Cuban | Not stated by the source |
| Octo Ocho | El Pulpo | Not stated by the source | The editors' example, 7 x 38 |
The editors also say Oliva made a culebra for a while.
The sources differ in how they describe production. One Cigar Aficionado editor thought the Partagas culebra was the only one remaining in production in the context he was discussing. Holt's names Partagas, H. Upmann and Romeo y Julieta as Cuban brands that have offered the shape since the Cuban revolution. A claim about brands that have offered a culebra does not establish that every listed cigar is being made at the same time.
Our page on Plasencia's Year of the Snake release lists a December 2024 run of 7 x 40 lanceros that included 12,000 culebras alongside 48,000 lanceros.
Who Should Skip a Culebra
Skip a culebra if you want one straight cigar to carry in a cigar case. Holt's says the braid is impractical to carry and will not fit in the leather case it describes. A reader who needs a predictable draw should also weigh Holt's report of occasional inconsistencies against the editors' good experiences. Neither account promises the same draw from every cigar.
More consistent draw evidence across the format would change that caution. A maker changing how its culebra is constructed could also change how useful older accounts are for that cigar. The two cited sources do not establish a draw result for every maker in the table.
For anyone handed a braid, the supported next step is to untie it and smoke the cigars separately or share them. The Cigar Aficionado editors give that handling advice, and Holt's also recommends sharing instead of lighting all three at once. Their reported experiences differ on draw, so judge each separated cigar on its own if a tight draw occurs.
Frequently Asked Questions
How do you smoke a culebra cigar?
Untie the braid, remove any band or shared cap, and separate the cigars before cutting and lighting one. Holt's gives the untying and removal steps. The Cigar Aficionado editors say to share the individual cigars or smoke them at different times.
Can you smoke all three at once?
Holt's says you can, but its author does not recommend it. The Cigar Aficionado editors say the braid is intended to be split into individual cigars. Cutting one head and trying to light the whole braid treats three cigars as though they were one.
Why is it called a culebra?
Culebra is Spanish for "snake." Both Holt's and the Cigar Aficionado editors connect the name to the cigars' winding, snake-like shape. The name describes the braid. It does not establish the factory-allotment origin story.
Are culebras Cuban?
Some culebras are Cuban, and the shape also appears among non-Cuban makers. Holt's names Partagas, H. Upmann and Romeo y Julieta among Cuban brands that have offered it. The same article names Tatuaje, Illusione and other non-Cuban makers.
What size is a culebra?
There is no single size established by these examples. Holt's describes the usual underfilled Panetelas as 6 x 38, while a Cigar Aficionado editor describes the El Pulpo Octo Ocho in the episode as 7 x 38. If you have a braid in hand, untie it and identify each cigar before cutting one to smoke.